Fuzzy AHP Approach in Handling Returns Product of Bottle Glass Mineral Water at PT Marina
DOI:
https://doi.org/10.36275/vvp9qe67Keywords:
Pareto, Fuzzy AHP, Normalization, Deffuyfication, Return ProductAbstract
PT Marina is a company engaged in bottled mineral water production, where one of its products is glass packaging. The fluctuating demand for glass bottled drinking water products causes companies to plan optimal production. Based on the results of image scanning using the SCAPSA application, it was found that the total return was 2193 glasses in December 2024. Based on the identification results using the Pareto diagram method, it was found that the highest product return from consumers was needle leaks, namely 895 glasses. The identification results indicate priority improvements that will be carried out using the Fuzzy AHP method with triangular fuzzy numbers. At the actor level, the highest normalization result was obtained for the production section with a defuzzification value of 0.78. At the factor level, the highest normalization was obtained for the quality of the glass packaging with a defuzzification value of 0.49. Hence, the optimal tension temperature setting on the felling machine was an alternative improvement for returning leaking needles with a defuzzification value of 0.55 and a consistency index of 0.03. Based on the results of the improvements, it was found that the company could reduce returns on products by 85.70% to 128 glasses.
Downloads
References
Al Khoiry, I., Gernowo, R., & Surarso, B. (2022). Fuzzy-ahp moora approach for vendor selection applications. Register: Jurnal Ilmiah Teknologi Sistem Informasi, 8(1), 24–37. https://doi.org/10.26594/REGISTER.V8I1.2356
Bieniek, M. (2021). Consumer returns in consignment contracts with inventory control and additive uncertainty. Infor, 59(1), 169–189. https://doi.org/10.1080/03155986.2020.1796065
Butdee, S., & Phuangsalee, P. (2019). Uncertain risk assessment modelling for bus body manufacturing supply chain using AHP and fuzzy AHP. Procedia Manufacturing, 30, 663–670. https://doi.org/10.1016/j.promfg.2019.02.094
Büyüközkan, G., Havle, C. A., & Feyzioğlu, O. (2020). A new digital service quality model and its strategic analysis in aviation industry using interval-valued intuitionistic fuzzy AHP. Journal of Air Transport Management, 86(December 2019). https://doi.org/10.1016/j.jairtraman.2020.101817
Cinar, U., & Cebi, S. (2020). A hybrid risk assessment method for mining sector based on QFD, fuzzy logic and AHP. In Advances in Intelligent Systems and Computing (Vol. 1029). Springer International Publishing. https://doi.org/10.1007/978-3-030-23756-1_141
Erdil, A. (2019). An Evaluation on Lifecycle of Products in Textile Industry of Turkey through Quality Function Deployment and Pareto Analysis. Procedia Computer Science, 158, 735–744. https://doi.org/10.1016/j.procs.2019.09.109
Ericsson, M., Johansson, D., & Stjern, D. (2021). Ai-based quality control of wood surfaces with autonomous material handling. Applied Sciences (Switzerland), 11(21). https://doi.org/10.3390/app11219965
Ginel, A. M., & Alvarez-Arenas, T. G. (2019). Air-coupled Transducers for Quality Control in the Food Industry. IEEE International Ultrasonics Symposium, IUS, 2019-Octob, 803–806. https://doi.org/10.1109/ULTSYM.2019.8925853
Ginting, R., & Fattah, M. G. (2020). Production quality control with new seven tools for defect minimization on PT. Dirgantara Indonesia. IOP Conference Series: Earth and Environmental Science, 452(1). https://doi.org/10.1088/1755-1315/452/1/012082
Ginting, R., Wanli, & Fauzi Malik, A. (2020). Crude Palm Oil Product Quality Control Using Seven Tools (case study: XYZ Company). IOP Conference Series: Materials Science and Engineering, 851(1). https://doi.org/10.1088/1757-899X/851/1/012046
Hasani, A., Eskandarpour, M., & Fattahi, M. (2018). A simulation-based optimisation approach for multi-objective inventory control of perishable products in closed-loop supply chains under uncertainty. International Journal of Advanced Operations Management, 10(4), 324–344. https://doi.org/10.1504/IJAOM.2018.097268
Katsios, D., Xanthopoulos, A. S., Koulouriotis, D. E., & Kiatipis, A. (2018). A simulation optimisation tool and its production/inventory control application. International Journal of Simulation Modelling, 17(2), 257–270. https://doi.org/10.2507/IJSIMM17(2)425
Liu, J., Ellies‐oury, M. P., Stoyanchev, T., & Hocquette, J. F. (2022). Consumer Perception of Beef Quality and How to Control, Improve and Predict It? Focus on Eating Quality. Foods, 11(12), 1–27. https://doi.org/10.3390/foods11121732
Malesa, M., & Rajkiewicz, P. (2021). Quality control of pet bottles caps with dedicated image calibration and deep neural networks. Sensors (Switzerland), 21(2), 1–16. https://doi.org/10.3390/s21020501
Malladi, S. S., Erera, A. L., & White, C. C. (2020). A dynamic mobile production capacity and inventory control problem. IISE Transactions, 52(8), 926–943. https://doi.org/10.1080/24725854.2019.1693709
Memon, I. A., Rajput, U. A., Ali, A., Abro, S. A. K., Memon, M. A., & Memon, A. A. (2019). Controlling the Defects of Paint Shop using Seven Quality Control Tools in an Automotive Factory. Engineering, Technology and Applied Science Research, 9(6), 5062–5065. https://doi.org/10.48084/etasr.3160
Ogundoyin, S. O., & Kamil, I. A. (2020). A Fuzzy-AHP based prioritization of trust criteria in fog computing services. Applied Soft Computing Journal, 97, 106789. https://doi.org/10.1016/j.asoc.2020.106789
Ojha, V. K., Dixit, S., & Goyal, S. (2019). An AHP-based comparison between automated and manual material handling systems in FMS environment. International Journal of Productivity and Quality Management, 28(2), 256–277. https://doi.org/10.1504/IJPQM.2019.102927
Polotski, V., Kenné, J. P., & Gharbi, A. (2019). Production control of hybrid manufacturing–remanufacturing systems under demand and return variations. International Journal of Production Research, 57(1), 100–123. https://doi.org/10.1080/00207543.2018.1461272
Prayudha, A., Husen, S., Siskandar, R., & Gilang, R. (2021). Evaluation of Chicken Eggs Supply With Fuzzy AHP Approach Through Development of Safea Software. 5(2), 104–110.
Prayudha Hidayat, A., Wiyoto, W., Julio Pratama, A., Vibowo, H., Husen Santosa, S., & Siskandar, R. (2023). Fuzzy Analytical Hierarchy Process (AHP) Model for Chicken Egg Supply and Demand Management Strategies Through SAFCES Application Development. E3S Web of Conferences, 454. https://doi.org/10.1051/e3sconf/202345403004
Ren, H., Chen, R., & Lin, Z. (2023). A Study of Electronic Product Supply Chain Decisions Considering Quality Control and Cross-Channel Returns. Sustainability (Switzerland), 15(16), 1–23. https://doi.org/10.3390/su151612304
Santosa, S. H., & Hidayat, A. P. (2019). Model Penentuan Jumlah Pesanan Pada Aktifitas Supply Chain Telur Ayam Menggunakan Fuzzy Logic. Jurnal Ilmiah Teknik Industri, 18(2), 224–235. https://doi.org/10.23917/jiti.v18i2.8486
Santosa, S. H., Hidayat, A. P., Siskandar, R., & Husyairi, K. A. (2023). Smart Production Planning Model for T-Shirt Products at Raensa Convection. Jurnal Ilmiah Teknik Industri, 22(1), 49–57. https://doi.org/10.23917/jiti.v22i1.21398
Satty, T. L. (1994). Theory and Methodology Highlights and critical points in the theory and application of the Analytic Hierarchy Process. European Journal of Operational Research, 74(3), 426–447.
Shaygan, A., & Testik, Ö. M. (2019). A fuzzy AHP-based methodology for project prioritization and selection. Soft Computing, 23(4), 1309–1319. https://doi.org/10.1007/s00500-017-2851-9
Singh, P. K., & Sarkar, P. (2019). A framework based on fuzzy AHP-TOPSIS for prioritizing solutions to overcome the barriers in the implementation of ecodesign practices in SMEs. International Journal of Sustainable Development and World Ecology, 26(6), 506–521. https://doi.org/10.1080/13504509.2019.1605547
Tooranloo, H. S., Ayatollah, A. S., & Iranpour, A. (2018). A model for supplier evaluation and selection based on integrated interval-valued intuitionistic fuzzy AHP-TOPSIS approach. International Journal of Mathematics in Operational Research, 13(3), 401–417. https://doi.org/10.1504/IJMOR.2018.094854
Venkatesh, V. G., Zhang, A., Deakins, E., Luthra, S., & Mangla, S. (2019). A fuzzy AHP-TOPSIS approach to supply partner selection in continuous aid humanitarian supply chains. Annals of Operations Research, 283(1–2), 1517–1550. https://doi.org/10.1007/s10479-018-2981-1
Wardah, S., & Baidawi, T. (2020). Development of Fuzzy Analytic Hierarchy Process(F-AHP) for the Selection of Alternative New Product Development Ideas in Coconut Downstream Agroindustry. Journal of Physics: Conference Series, 1641(1). https://doi.org/10.1088/1742-6596/1641/1/012024
Zhu, G. N., Hu, J., & Ren, H. (2020). A fuzzy rough number-based AHP-TOPSIS for design concept evaluation under uncertain environments. Applied Soft Computing Journal, 91, 106228. https://doi.org/10.1016/j.asoc.2020.106228
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Sesar Husen Santosa, Agung Prayudha Hidayat, Ridwan Siskandar, Annisa Rizkiriani, Khoirul Aziz Husyairi
This work is licensed under a Creative Commons Attribution 4.0 International License.
